Our brushed direct current motors (DC series) are usually available in 12V and 24V versions, but special voltages are also possible. The winding is located in the rotor/armature and the current transmission takes place via carbon brushes. The magnetic excitation is generated by means of a permanent magnet. All DC motors can be operated directly with a voltage source, or optionally with our electronics specially developed for brushed motors. The drives are characterized by optimum controllability, high overload capacity, and freedom from maintenance. All mechanical and electrical connections can be customized according to customer requirements. A reversal of the direction of rotation is possible by reversing the polarity so that all motors are designed for clockwise as well as counterclockwise rotation. In addition, all DC motors meet the insulating material class E.
DC-MOTORS
Customised brushed motors
At KAG, the focus is always on customer-specific requirements and specifications. By adapting the drives to your application, we can offer individual solutions. In addition, our DC motors are characterised by the following features:
- Design according to the specific requirements
- Optimum utilisation of the installation space
- Compliance with the specifications for mechanical values
- Compliance with environmental requirements
- Compliance with noise and temperature requirements
- Energy efficiency
- Cost target
Our portfolio
Our standard range of brushed DC motors currently covers six standard diameters, with different overall lengths. On request, all drives are available with intelligent control electronics. These series are the basis for versatile application solutions and drive combinations. For further information, please refer to the detailed view of the individual motor types, as well as to the individual data sheet.
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| Series | M36 | M42 | M48 | M50 | M63 | M80 |
| Rated voltage [V] | 12 – 24 | 12 – 24 | 12 – 24 | 24 | 12 – 24 | 12 – 24 |
| Torque [Ncm] | 3 – 4 | 4 – 9 | 5 – 15 | 11 – 18 | 14 – 30 | 38 – 70 |
| Rated Speed [1/min] | 2900 – 3400 | 3000 – 3400 | 2800 – 3300 | 2800 – 2900 | 2850 – 3300 | 2850 – 3200 |
| Motor length [mm] | 60 – 70 | 70 – 95 | 91 – 126 | 91 – 126 | 95 – 130 | 132 – 172 |
| Shaft diameter | 4k5 | 5k5 | 5k5 | 6g5 | 8g5 | 12g5 |
| Wavelength l [mm] | 20 | 20 | 20 | 20 | 25 | 30 |
| Type | x20 x30 |
X15 X20 X30 X40 |
X25 X50 X60 |
X28 X65 |
X25 X40 X60 |
X40 X80 |
| Planetary gear | P32 | P32 PK42 P42 P52 |
PK42 P42 P52 |
P42 P52 |
P52 P62 P81 |
P62 P81 |
| Worm gear | – | SN17 SN22,6 |
SN17 SN22,6 SN31 |
SN22,6 SN31 |
SN31 SN40 |
SN40 |
| Spur gear | – | S5 | S5 | – | – | – |
| Electronics | – | I42DC | I42DC | I42DC | I63DC | I80DC |
| Magnetic Encoder | – | IGM x/y IGM x/y LD IGMi |
IGM x/y IGM x/y LD IGMi |
IGM x/y IGM x/y LD IGMi |
IGM x/y IGM x/y LD IGMi |
IGM x/y IGM x/y LD IGMi |
| Optical Encoder | IGO x/2 RU | IGO x/2 IGO x/3 |
IGO x/2 IGO x/3 |
IGO x/2 IGO x/3 |
IGO x/2 IGO x/3 |
IGO x/2 IGO x/3 |
| Spring applied brakes | – | B37 B47 |
B47 | B47 | B47 B56 B60 |
B47 B56 B60 |
| Power on brakes | – | ASB32 | ASB32 | ASB32 | ASB32 ASB40 ASB43 |
ASB40 ASB43 |
6 steps to your individual drive system
From conception to realisation of the final product – we provide reliable support throughout the entire development process!
Idea
Based on your application, we will work with you to analyse the requirements and initial solutions.
Consulting
Technical feasibility and variants are examined so that you can make an informed decision about function, integration and costs.
Concept
You will receive a customised drive concept, including initial samples and CAD data for your further development.
Optimisation
Design and function are gradually refined, including EMC preliminary testing and service life tests.
Approval
Once you have given your approval, a pre-production series is manufactured under series conditions, allowing you to comprehensively test and approve the drive solution under real-use conditions.
Series production
Flexible and reliable in-house production guarantees that your quantities are produced on time and in accordance with the highest quality standards.
Contact us now
Do you have a specific enquiry or would you like to discuss your project with us directly?
Our sales team is here to assist you personally – whether you have technical questions, require a quote or want to discuss joint project planning. Simply use the contact form and we will get back to you as soon as possible.
Your contact person:
André Harstrick
Sales director