- Housing: aluminum, bronze worm gear, hardened steel worm (grinded), grease lubrication for life, output shaft in ball bearing, optional second output shaft or output shaft left
Output on ball bearings, optional second shaft end, or output shaft on left side - other reductions, output shafts, or connection cables on request
MOTOR M63 WITH WORM GEAR SN31
Gear reduction table M63 + SN31
| M63x25/I | M63x40/I | M63x60/I | ||||
| Gear reduction | Number of gear stages | Efficiency | Speed at motor-speed 3000 rpm |
Continous torque | ||
|---|---|---|---|---|---|---|
| [i = x : 1] | [x] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] |
| 7 | 1 | 90 | 429 | 88 | 113 | 139 |
| 10 | 1 | 84 | 300 | 118 | 151 | 185 |
| 15 | 1 | 72 | 200 | 151 | 194 | 238 |
| 38 | 1 | 46 | 79 | 245 | 315 | 385 |
General gear data
| Number of gear stages [x] | 1 | 2 | 3 |
|---|---|---|---|
| Max. continous torque [Ncm] | 400 | 0 | 0 |
| Recommanded input-speed [1/min] | < 3000 | < 3000 | < 3000 |
| Permissible axial shaft load [N] | 200 | 0 | 0 |
| Permissible radial shaft load [N] | 600 | 0 | 0 |
| Backlash (unloaded) [°] | < 0.5 | 0 | 0 |
| Temperature range [°C] | -30 … 80 | -30 … 80 | -30 … 80 |
| Gear-length [mm] | 71 | 0 | 0 |