- Housing made of aluminum, worm made of hardened steel, permanent grease lubrication
- Ball-bearing output, optional second shaft end, or left output shaft
- Other reductions, output shafts, or connection lines on request
MOTOR M80 WITH WORM GEAR SN40

Gear reduction table M80 + SN40
M80x40/I | M80x80/I | ||||
Gear reduction | Number of gear stages | Efficiency | Speed at motor-speed 3000 rpm |
Continous torque | |
---|---|---|---|---|---|
[i = x : 1] | [x] | [%] | [1/min] | [Ncm] | [Ncm] |
8 | 1 | 70 | 375 | 213 | 392 |
10 | 1 | 84 | 300 | 319 | 588 |
15 | 1 | 72 | 200 | 410 | 756 |
30 | 1 | 40 | 100 | 456 | 840 |
50 | 1 | 35 | 60 | 665 | 1225 |
General gear data
Number of gear stages [x] | 1 | 2 | 3 |
---|---|---|---|
Max. continous torque [Ncm] | 1500 | 0 | 0 |
Recommanded input-speed [1/min] | < 3000 | < 3000 | < 3000 |
Permissible axial shaft load [N] | 300 | 0 | 0 |
Permissible radial shaft load [N] | 500 | 0 | 0 |
Backlash (unloaded) [°] | 3 | 0 | 0 |
Temperature range [°C] | -30 … 80 | -30 … 80 | -30 … 80 |
Gear-length [mm] | 105 | 0 | 0 |