Kontaktformular
Ansprechpartnersuche
slide-bg

MOTOR M63 WITH WORM GEAR SN40

  • Housing made of aluminum, screw made of hardened steel, permanent grease lubrication,
    Output on ball bearings, optional second shaft end, or output shaft on left side
  • Other reduction ratios, output shafts, connecting cables or voltage on request

Gear reduction table M63 + SN40

 

M63x25/I M63x40/I M63x60/I
(12V)		 M63x60/I
(24V)
Gear reduction Efficiency of the gear Speed at motor-speed 3000rpm Nominal torque at 24V in S1-operation
[i = x : 1] [%] [1/min] [Ncm] [Ncm] [Ncm] [Ncm]
10 74 300 104 133 163 222
15 68 200 143 184 224 306
30 56 100 235 302 370 504
40 50 75 280 360 440 600
50 46 60 322 414 506 690
60 33 50 277 356 436 594

 

M63x25/I M63x40/I M63x60/I
(12V)		 M63x60/I
(24V)
Gear reduction Efficiency of the gear Speed at motor-speed 3000rpm Nominal torque at 24V in S3-operation
[i = x : 1] [%] [1/min] [Ncm] [Ncm] [Ncm] [Ncm]
10# 84 300 177 227 278 378
15# 76 200 240 308 376 513
30 60 100 378 486 594 810
40 54 75 454 584 713 972
50 50 60 525 675 825 1125
60 35 50 441 567 693 945

#plastic design

General gear data

Material worm wheel Plastic Brass
Max. torque [Ncm] 1200 2800
Permissible shaft load [N] (axial/radial) 300/600 300/600

Download data sheets

Motor M63 with worm gear SN40