- Housing made of zinc die-cast, worm made of hardened steel, grease lubrication for life, output shaft in ball bearing, optional second output shaft or output shaft left
Output on ball bearings, optional second shaft end, or output shaft on left side - Other reduction ratios, output shafts, connecting cables or voltage on request
MOTOR M48 WITH WORM GEAR SN31

Gear reduction table M48 + SN31
M48x25/I | M48x28/I | M48x50/I | M48x60/I | |||
Gear reduction | Efficiency of the gear | Speed at motor-speed 3000rpm | Nominal torque at 24V in S1-operation | |||
---|---|---|---|---|---|---|
[i = x : 1] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] | [Ncm] |
7 | 69 | 428,5 | 24 | 48 | 48 | 72 |
10 | 66 | 300 | 33 | 66 | 66 | 99 |
15 | 62 | 200 | 47 | 93 | 93 | 140 |
25 | 52 | 120 | 65 | 130 | 130 | 195 |
38 | 46 | 78,9 | 87 | 175 | 175 | 262 |
50 | 40 | 60 | 100 | 200 | 200 | 300 |
M48x25/I | M48x28/I | M48x50/I | M48x60/I | |||
Gear reduction | Efficiency of the gear | Speed at motor-speed 3000rpm | Nominal torque at 24V in S3-operation | |||
---|---|---|---|---|---|---|
[i = x : 1] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] | [Ncm] |
7 | 78 | 428,5 | 41 | 82 | 82 | 123 |
10# | 79 | 300 | 60 | 119 | 119 | 178 |
15# | 72 | 200 | 87 | 174 | 174 | 260 |
25 | 58 | 120 | 109 | 218 | 218 | 327 |
38 | 50 | 78,9 | 143 | 285 | 285 | 428 |
50 | 44 | 60 | 165 | 330 | 330 | 496 |
#plastic design
General gear data
Material worm wheel | Plastic | Brass | |
---|---|---|---|
Max. torque | [Ncm] | 800 | 1200 |
Permissible shaft load | [N] (axial/radial) | 200/500 | 200/500 |