- Housing: aluminum, bronze worm gear, hardened steel worm (grinded), grease lubrication for life, output shaft in ball bearing, optional second output shaft or output shaft left
Output on ball bearings, optional second shaft end, or output shaft on left side - Other reduction ratios, output shafts, or connecting cables on request
MOTOR M48 WITH WORM GEAR SN22,6
Gear reduction table M48 + SN22,6
| M48x25/I | M48x50/I | M48x60/I | ||||
| Gear reduction | Number of gears | Efficiency | Speed at motor-speed 3000 rpm |
Continous torque | ||
|---|---|---|---|---|---|---|
| [i = x : 1] | [x] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] |
| 3 | 1 | 79 | 1000 | 12 | 24 | 36 |
| 4 | 1 | 79 | 750 | 16 | 32 | 47 |
| 7 | 1 | 71 | 429 | 25 | 50 | 75 |
| 15 | 1 | 56 | 200 | 42 | 84 | 126 |
| 21 | 1 | 46 | 143 | 48 | 97 | 145 |
| 30 | 1 | 39 | 100 | 59 | 117 | 176 |
| 40 | 1 | 34 | 75 | 68 | 136 | 204 |
General gear data
| Number of gear stages [x] | 1 | 2 | 3 |
|---|---|---|---|
| Max. continous torque [Ncm] | 410 | 0 | 0 |
| Recommanded input-speed [1/min] | < 3000 | < 3000 | < 3000 |
| Permissible axial shaft load [N] | 40 | 0 | 0 |
| Permissible radial shaft load [N] | 40 | 0 | 0 |
| Backlash (unloaded) [°] | < 3 | 0 | 0 |
| Temperature range [°C] | -30 … 80 | -30 … 80 | -30 … 80 |
| Gear-length [mm] | 51 | 0 | 0 |