- Housing made of aluminum, worm made of hardened steel, permanent grease lubrication, output ball bearing, optional second shaft end or output shaft on the left
- Other reduction ratios, output shafts, or connecting cables on request
MOTOR M48 WITH WORM GEAR SN17
Gear reduction table M48 + SN17
M48x25/I | M48x50/I | M48x60/I | ||||
Gear reduction | Number of gears | Efficiency | Speed at motor-speed 3000 rpm |
Continous torque | ||
---|---|---|---|---|---|---|
[i = x : 1] | [x] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] |
7 | 1 | 75 | 429 | 26 | 53 | 79 |
10 | 1 | 70 | 300 | 35 | 70 | 105 |
15 | 1 | 65 | 200 | 49 | 98 | 146 |
25 | 1 | 55 | 120 | 69 | 138 | 206 |
40 | 1 | 40 | 75 | 80 | 160 | 240 |
50 | 1 | 40 | 60 | 100 | 200 | 300* |
60 | 1 | 35 | 50 | 105 | 210 | 315* |
75 | 1 | 25 | 40 | 94 | 188 | 281* |
* Motors have to be operated with current limitation
General gear data
Number of gear stages [x] | 1 | 2 | 3 |
---|---|---|---|
Max. continous torque [Ncm] | 265 | 0 | 0 |
Recommanded input-speed [1/min] | < 3000 | < 3000 | < 3000 |
Permissible axial shaft load [N] | 60 | 0 | 0 |
Permissible radial shaft load [N] | 100 | 0 | 0 |
Backlash (unloaded) [°] | < 0.5 | 0 | 0 |
Temperature range [°C] | -30 … 40 | -30 … 40 | -30 … 40 |
Gear-length [mm] | 40 | 0 | 0 |