- Aluminum gear housing, hardened steel worm wheel, permanent grease lubrication, output with ball bearing, optional second shaft or output shaft left
- Other reductions, output shaft or connection cable on request
Motor M42 with worm gear SN17
Gear reduction table M42 + SN17
| M42x10/I | M42x15/I | M42x20/I | M42x30/I | M42x40/I | ||||
| Gear reduction | Number of gear stages | Efficiency | Speed at motor-speed 3000 rpm |
Continous torque | ||||
|---|---|---|---|---|---|---|---|---|
| [i = x : 1] | [x] | [%] | [1/min] | [Ncm] | [Ncm] | [Ncm] | [Ncm] | [Ncm] |
| 7 | 1 | 75 | 429 | 13 | 21 | 26 | 34 | 42 |
| 10 | 1 | 70 | 300 | 18 | 28 | 35 | 46 | 56 |
| 15 | 1 | 65 | 200 | 24 | 39 | 49 | 63 | 78 |
| 25 | 1 | 55 | 120 | 34 | 55 | 69 | 89 | 110 |
| 40 | 1 | 40 | 75 | 40 | 64 | 80 | 104 | 128 |
| 50 | 1 | 40 | 60 | 50 | 80 | 100 | 130 | 160 |
| 60 | 1 | 35 | 50 | 53 | 84 | 105 | 137 | 168 |
| 75 | 1 | 25 | 40 | 47 | 75 | 94 | 122 | 150 |
General gear data
| Number of gear stages [x] | 1 | 2 | 3 |
|---|---|---|---|
| Max. continous torque [Ncm] | 265 | 0 | 0 |
| Recommanded input-speed [1/min] | < 3000 | < 3000 | < 3000 |
| Permissible axial shaft load [N] | 60 | 0 | 0 |
| Permissible radial shaft load [N] | 100 | 0 | 0 |
| Backlash (unloaded) [°] | < 0.5 | 0 | 0 |
| Temperature range [°C] | -30 … 40 | -30 … 40 | -30 … 40 |
| Gear-length [mm] | 40 | 0 | 0 |