Kontaktformular
Ansprechpartnersuche
slide-bg

MOTOR ECM63 WITH WORM GEAR SN40

  • Housing made of aluminum, screw made of hardened steel, permanent grease lubrication,
    Output on ball bearings, optional second shaft end, or output shaft on left side
  • Other reduction ratios, output shafts, connecting cables or voltage on request

Gear reduction table ECM63 + SN40

 

ECM63x20/I ECM63x40/I ECM63x60/I
Gear reduction Efficiency of the gear Speed at motor-speed 3000rpm Nominal torque at 24V in S1-operation
[i = x : 1] [%] [1/min] [Ncm] [Ncm] [Ncm]
10 74 300 89 222 296
15 68 200 122 306 408
30 56 100 202 504 672
40 50 75 240 600 800
50 46 60 276 690 920
60 33 50 238 594 792

 

ECM63x20/I ECM63x40/I ECM63x60/I
Gear reduction Efficiency of the gear Speed at motor-speed 3000rpm Nominal torque at 24V in S3-operation
[i = x : 1] [%] [1/min] [Ncm] [Ncm] [Ncm]
10# 84 300 152 378 504
15# 76 200 205 513 684
30 60 100 324 810 1080
40 54 75 389 972 1296
50 50 60 450 1126 1500
60 35 50 378 945 1260

#plastic design

General gear data

Material worm wheel Plastic Brass
Max. torque [Ncm] 1200 2800
Permissible shaft load [N] (axial/radial) 300/600 300/600

Download data sheets

Motor ECM63 with worm gear SN40