- Steel gear housing, aluminum gear flange
- Other reductions, output shaft or connection cable on request
Motor ECM75 with planetary gear P52
Gear reduction table ECM75 + P52
| ECM75x20/I | ECM75x40/I | ECM75x60/I | ||||
| Reduction | Number of steps | Efficiency | Speed at 3000 |
Continuous torque | ||
|---|---|---|---|---|---|---|
| [i = x: 1] | [x] | [%] | [1 / min] | [Ncm] | [Ncm] | [Ncm] |
| 3.7 | 1 | 80 | 810 | 59 | 118 | 207 |
| 7 | 1 | 80 | 428 | 112 | 224 | 392 |
| 14 | 2 | 75 | 214 | 210 | 420 | 735 |
| 25 | 2 | 75 | 120 | 375 | 750 | 1200 * |
| 46 | 2 | 75 | 65 | 690 | 1200 * | 1200 * |
| 93 | 3 | 70 | 32 | 1302 | 2500 * | 2500 * |
| 169 | 3 | 70 | 18 | 2366 | 2500 * | 2500 * |
| 308 | 3 | 70 | 9.7 | 2500 * | 2500 * | 2500 * |
* Motors have to be operated with current limitation
General gear data
| Number of levels [x] | 1 | 2 | 3 |
|---|---|---|---|
| Max. Continuous torque [Ncm] | 400 | 1200 | 2500 |
| Permissible shaft load [N] (axial / radial) | 60/200 | 100/320 | 150/450 |
| Gear length [mm] | 47.7 | 61.8 | 75.9 |